01-10-2022

The Noseball MTB stem

We have regularly published photos of our new MTB stem on our Instagram account, we can now officially launch the final version. This product is the first produced 100% by us due to the milling machine we bought earlier this year (even if the Fusion sprockets were almost produced by us...), we now manage the whole loop : CAD, CAM and machining ! To be honest, this project was very demanding and stressful, in fact stem production is much more complicated than a sprocket, requiring up to 6 different opérations and clamps (change of position of the stem in the machine), while a sprocket needs a single operation. A stem is a massive part in three dimensions (in comparison, a sprocket is a flat product, like two dimensions) with accurate dimensions (steerer tube and bar, several thread holes...etc.), geometry to be respected (ex : perpendicularity between steerer tube and bar). It requires thoroughness and rigor throughout the manufacturing process, without forgetting a need for specific cutting tools and also fixtures (wedges and interfaces for clamping the part, guide for tapping, etc.).
This stem is called "Noseball", beacause of these many surfaces produced by machining using a tool called "ball end" or "nose ball". For the explanation, these tools allow to obtain almost any surface / shape, by controlling the point of tangency between the spherical end of the tool and the surface to be produced, while dividing this surface / shape in very thin slices (from 0.01 to 0.1mm depending on the level of finish). It generates lots of tool back and forth movements, we love using these 3D operation carried out with ball end tool, opening up almost endless possibilities !
The Noseball stem will be available later this year, a first prototype has been tested on the boss' fat bike for two months, a small batch is also finished (including a black anodizing one) and is dispatched to three riders in order to approve the product. In terms of characteristics, the stem match 31,8mm bar, it's 50mm long and 0mm high, full stainless steel 6mm bolts, a total weight of 198grs and at least each stem is numbered by engraving (00 to 03).
This project is a success, it requires many hours of programming to achieve toolpaths allowing to obtain the expected end result, also many hours of machining and lots of (too much) reflection and questioning. We take this opportunity to thank several people who support us for this project : Pierre @ OP.N (FEA study, listening during the whole process of machining), Benoît @ LG Tech (many tips and support for cutting tools), Charles @ Versatil Motorcycle (supply for wedge and interface, guide for tapping), finally the riders who will ride and test the first stems were also source of support and motivation (Laurent @ boss' father, François @ ROD29, Pierre @ Royal shore).
Below, we present to you steps of machining (in chronological order) of the Noseball stem, from raw aluminum billet to the first prototype built up and also photos of the very beautiful black anodized version.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
12-23-2021

Shape Bicycles wishes

For the end of the year wishes, we chose to use a logo which left in the boxes and unused so far... It is obviously inspired by the famous American trash band Slayer (which the boss is mega fan), redesigned by Shape and "inspired by trail" too.
Through this superb logo, we wish you a Merry Christmas and an happy New Year 2022, to you and your loved one.

Image
11-19-2021

+1000 followers on the Shape bicycles' Instagram account

We have to admit that we were looking forward to this milestone and we are proud to say that over 1000 people follow Shape bicycles in Instagram ! Thanks to everyone who is interested in our activities. 

Image
11-17-2021

Les trois roux - New Shape bicycles retailer

We are happy to welcome a new Shape bicycles retailer in the West of France, more accuracy at Caen in Normandy, at the shop Les trois roux. A huge thank you to Paul for his interest towards our products and to trust our Made in France approach. Find below some photos taken by the shop, to illustrate the Fusion sprockets, which are available at the shop and on their website.

Image
Image
Image
11-14-2021

Jbibi video - Trails 2021

URL de Vidéo distante
11-09-2021

End of the season for the Shape bicycles' family

Shape bicycles riders have all enjoyed the last few sessions of the year, wether it was during a jam or a daily session with friends. Each of them was able to enjoy their home spot or appreciate their friends' trails while immortalizing this feeling on photos as its shown below.
- Bérenger should be the only Shape bicycles' rider to keep on riding his home trail (thanks to the South weather). He often rides at Peynier, all the different lines are well maintained with a strong crew, Peynier never dies ! Photos by Gilles Fina
- Jems was able to enjoy la Source before its end, especially during the last jam in September as shown with those photos taken by David Andre & Paul Lavigne
- Bruno took advantage of Septembre to make a road trip to the South, la Source trail jam being the point of arrival. During the trip, he made a stop to warm up at Banos, along with Gillian (GRO trail). Photos by Toine
- JB never stops riding or traveling, he took part of every jam or session, without to forget to maintain the Martine trail along with Alaric. Below, some beautiful photos at Etbos trail by Paul Lavigne and another at Martine trail by Simon Cassol
 

Image
Image
Image
Image
Image
Image
Image
Image
Image
11-05-2021

Andrew “Inch” Thomson - Welcome to Fit UK

URL de Vidéo distante
11-03-2021

2021 UK trail scene by PJ

Our friend PJ from Pumpy trail, Bristol (UK) is well know for his skills in digging, joking and obviously behind the lens. This year, we have noticed several jams or "meetings" throughout UK, on different trails over the country, where most of the time PJ was present. This is why he was able to make this gallery of photos of this year of trail, which Ride UK magazine publish on their website. Find below some of PJ best photos : Conan at Pumpy, Sven at Woodyard, Sergio at sheet. Full gallery

Image
Image
Image
09-19-2021

The last jam of la Source

The latest jam at la Source trail was held at Toulouse last weekend. After 17 years dedicated to create the spot, make it evolved, locals were powerless against the council and their wish to recover the place (we will not give all details about this story, which is unbelievable...), their ultimatum is to clear the place by the end of the year.
The Shape Bicycles bicycles family was almost complete in order to enjoy la Source a last time, only Bérenger was missing due to work obligation. After an uncertain Thursday and Friday in terms of weather, trail was rebuilt to be able to ride on weekend, thanks to the devotion of all the riders present. A special guest attended the event this year, the American photographer Rob Dolecki who exhibited his most beautiful trail shots and who was in charge of a report for Dig BMX. At the same time, Ben Bello and his cameramen friend were also present for a video report of la Source and his upcoming end.
This year, we have to say spectators were numerous, on the other hands few foreign riders were there (due to health restrictions), but the French scene was there obviously, along with lots of Spanish riders ! Not all the lines were running, only Lombric (with a new first jump at and its final camel), Poutine (new line dug this winter) Tac and Frelon, the queue at the start stretched to the end of Lombric (the loop was complete). As usual, the show was on Tac and Frelon lines, close to the hunt and the bar, amongst the highlighted riders : some of the Spanish riders, JB with style and ease, the Tranchée trail crew, Bruno and some turndowns (his new surname is Tim Managueur, with French pronunciation), local Harry who wanted to enjoy Frelon as much as possible; without to forget some beautiful tricks on Lombric hip (also close to the hunt) : some Belgiums riders and Dim always easy, our friend Max from Vendée, some riders from Grenoble, Pef, Kiki and his chair, even Jems was able to ride on Sunday !
Saturday ended on the famous concert at the trail, this year it was The quiet punks band whose drummer is Justin, another local of the trail. Température of the evening rose as the rock covers played by the band (Blink, Offspring, Muse, Rage against, Red hot...etc.), the end point was the show of a local of Pinard trail (censored photo) !
A big thank you to the locals (who were almost all there, current and old members, even the expatriates) for this last welcoming on their trail (while waiting for being invited on their futur one), always a well established organization and good vibes !
Below, some photos of the jam taken by Aérien Plootographie, thanks to him for sharing !

Image
Image
Image
Image
Image
Image
09-09-2021

The troopers

Troopers is the name of the MTB event organized by the Breizh troopers team, which is supported by Shape bicycles since 2020. This all-mountain / enduro event was held the first weekend of September, in Southern Brittany, at Quimper (29). Each year, the team manage to promote their technical and beautiful trails, by renewing or creating new paths. The Shape boss took part of the event, with his fat bike and some parts from the brand, in order to enjoy the dusty trails and the perfect weather. Below, a photo of the boss and his father (original member of the team).

Image
Image